On this page
One pattern behind every photo evidence use case
A car is handed to a renter. A ceiling is damaged by a leak. A wall is closed over new pipes. A parcel is left at a door. A flat is handed to a tenant. In each case, the state of something at a given moment will matter later, and only one moment allows it to be recorded.
Ordinary photos record that moment badly. Their date comes from the phone, the file can be edited, and one party keeps it. Our photo evidence guide explains the four conditions that make a photo hard to contest: live capture, an independent timestamp, an integrity seal and public verification.
This page applies those conditions sector by sector. For each one, it gives the usual disagreement, the moment to capture, and what the proof changes. Each section points to a longer article.
The tool is the same throughout. tryVidimus is an API: your application creates a capture link for a booking, a claim or an order, and the link opens a capture page in the browser with your logo and your wording. The person takes the photos live, with no gallery import and nothing to install. The proof is then sealed with a fingerprint per file, a C2PA signature on each photo and a qualified electronic timestamp.
Vehicle and equipment rental
The disagreement: the owner says the bumper came back scratched, and the renter says the scratch was already there at pickup. With equipment, it is a mark on the front glass of a lens, or a part missing from a kit. Both sides have photos, and neither set can be dated or checked.
The moments to capture are the handover and the return. Cars, vans, motorhomes, boats and scooters use one shot list; cameras, lenses, drones, tools and outdoor gear use another. The list is the same at both moments, so the same angle can be put side by side.
- At pickup, the owner or the agent captures the vehicle before the keys change hands.
- At return, the capture is taken again, with the same shots, before the vehicle is moved or cleaned.
- Both proofs carry the booking reference, and the return proof can be linked to the pickup proof as its “after”.
What the proof changes: the discussion is no longer about whose files are real. Both parties open the same two records, each with its certified date. If the pickup proof shows the scratch, the claim stops; if it does not, the renter can hardly say the photos were redated.
Our article on proving vehicle condition at pickup and return gives a full shot list, explains who should hold the phone, and shows how to assemble a file by booking reference.
Insurance claims
The disagreement here is quieter. The policyholder says the leak stained the ceiling on a given day and sends photos. The insurer can answer that nothing shows the photos were taken that day. An emailed file says nothing reliable about where it comes from, when it was taken or whether it was retouched.
The moment to capture is the report of the claim. The policyholder opens a link and photographs the damage live, following a shot list suited to the type of claim: a wide shot, the damaged area, a close-up. Water damage, storm damage and vehicle damage each get their own list.
What the proof changes: the claims handler sees when the proof was sealed and that nothing has changed since. The questions about the file are answered before the file is opened. The handler's attention can go to the claim itself.
The limits matter in this sector more than in any other. The product does not assess the damage and does not detect fraud. It attests the origin, the date and the integrity of the photos, and nothing else. Our article on verified photos for insurance claims describes where the capture fits in a claims process.
Construction: progress, hidden works and handover
On a building site, what needs proving often disappears. Pipes are covered by a screed, insulation by plasterboard, a waterproofing layer by tiles. Months later, a client or another trade questions what was done, and the only way to look is to break something open.
There are three moments to capture, and each one has its own shot list:
- Hidden works, just before they are closed: the photo is the last view anyone will have.
- Progress, at each milestone that triggers a payment or the arrival of the next trade.
- Handover, for each reserve noted with the client, and again once the reserve is lifted.
The site manager or the subcontractor captures from a phone, on site, from a link. Your application sets the reference: a site, a lot, a work order. A reserve and its correction make a natural pair of linked proofs, as long as the same party captures both.
What the proof changes: the date of the photo no longer rests on the word of the company that took it. A third party dated it when it was sealed. Our article on construction site photo documentation covers the capture moments and how to organise proofs by lot and date.
Delivery and shipping
Two claims come back constantly: “I never received it” and “it arrived damaged”, with the variant of the empty box. The usual delivery photo is weak for the same reasons as any other photo. It sits in the carrier's system, with the carrier's date, and the customer has to take the carrier's word.
The capture moments sit at both ends of the journey:
- Before shipping, the seller photographs the item, then the packed and closed box, live on the capture page.
- At the door, the driver captures the parcel where it is left, from a link opened in the driver's app or browser.
What the proof changes: against an empty-box or not-as-described claim, the proof of what went into the box exists before the parcel leaves. Against a not-received claim, the delivery photo has a date set by a third party and a seal anyone can check. The proof does not say who took the parcel afterwards.
Our article on proof of delivery photos goes through the weak points of standard delivery photos and the two capture moments in detail.
Property inspections
When a tenancy ends, the landlord and the tenant compare the home as it is with the home as it was. The disagreement is about the difference: a stain on a carpet, a chipped worktop, a mark on a wall. Each side remembers the starting point in its own favour.
The moments to capture are the move-in and the move-out, room by room, with the same list of shots. The agent or the landlord captures both, and the move-out proof is linked to the move-in proof. Both parties get the public verification links.
What the proof changes: the move-in photos can no longer be suspected of having been taken later, or retouched. They carry a date certified when they were sealed, long before any disagreement.
Our article on property inspection photos proposes a room-by-room protocol and explains how to use the two proofs when a deposit is contested.
Short-term rentals
A short-term rental repeats the property inspection every few days, with nobody on site. The guest leaves in the morning, the next one arrives in the afternoon. When a host and a guest disagree about damage, each has photos that anyone could have edited or redated.
The moments to capture are before arrival and after departure. The host, the concierge or the cleaning staff opens a link on a phone and takes the requested photos, room by room. After check-out, the same list of shots is taken again, and that second proof is linked to the first as its “after”.
What the proof changes: the platform presents two proofs dated by a third party, one from before the stay and one from after. The guest, the host or an insurer opens each public link without an account. The platform does not have to defend files stored on its own servers.
This is the first use case: ScanStay, a tool made by the same team, uses tryVidimus in production for the condition report of short-term rentals. Our use cases page follows a stay step by step, from the capture before check-in to the disagreement.
Frequently asked questions
Which industries use photo evidence?
Any activity where something changes hands or changes state, and where two parties may later disagree about it. The photo evidence use cases covered here are vehicle and equipment rental, insurance claims, construction, delivery and shipping, property inspections and short-term rentals. The pattern is the same everywhere: the proof has to exist before the disagreement, not after it.
Do I need a different tool for each sector?
No. The capture, the sealing and the verification are identical in every sector. What changes is the shot list, which you define in a capture template, and the reference you attach to each capture: a booking, a claim number, an order or a site. One integration covers several journeys, and each journey keeps its own list and its own texts.
Does a sealed photo say who is right?
No. A sealed photo shows that a file existed at a certified date, has not changed since and came from a live capture. It does not compare two photos, measure damage or assign responsibility. The parties, a support team, an insurer or a judge draw the conclusions. The proof makes sure they discuss the facts and not the origin of the files.
Does the person taking the photos need an app?
No. The capture page is a web page opened from a link, in the phone's browser or in a webview inside your own application. It carries your logo, your colours and your wording. A renter, a policyholder, a driver or a cleaner takes the requested photos and closes the page. There is nothing to install.
Can a “before” and an “after” capture be linked?
Yes. When your application creates the second capture, it can name an existing sealed proof as its “before”. The “after” proof then points to it, and the capture page asks for the same shots. Both captures must carry the same reference and come from the same party. The product links the two proofs; it does not compare the photos.
Do sealed photos have legal value outside the European Union?
The presumption attached to a qualified electronic time stamp comes from the eIDAS Regulation and applies in the European Union only. Elsewhere, the timestamp remains a signed, verifiable record of the date, and the seal still shows that the file has not changed. How much weight a court gives it depends on local rules. For a specific case, ask a lawyer.
Try it in the sandbox
Photo evidence use cases differ by sector, but the method does not: capture live at the moment that matters, seal, and let anyone verify. Pick the journey closest to yours and start with its shot list. You can build and test it for free in the sandbox, without a card.
Create an accountOfficial sources
Cédric Driaux · Founder of tryVidimus
Cédric Driaux is the founder of tryVidimus, published by Fyher. He has been a software developer for 23 years. He also builds ScanStay, a photo proof tool for short-term rental hosts.